JMT ADT-K43D M.2 NGFF NVMe Key M to PCI-E x16 Extension Cable SATA Power Cable PCIe4.0 x4 High Speed for STX Motherboard Graphics Card GPU (K43DT-TU,25CM)

JMT ADT-K43D M.2 NGFF NVMe Key M to PCI-E x16 Extension Cable SATA Power Cable PCIe4.0 x4 High Speed for STX Motherboard Graphics Card GPU Product Detail: Product Model: K43 Series Product Name：M.2 NVMe key M to PCI-E X16 Angled Extension Adapter Cable Cable length: 5cm,15cm,25cm (support cable length customisation) Purchase Tips: Be sure to order 1~2 samples to test and verify that there is no error before purchasing large quantities. Friendly reminder: This product is compatible with many problems, incorrect assembly or improper operation will burn your equipment. Professional engineers specify the purchase. Accessory Note: Comes with a SATA power adapter cable that must be connected for 12V power. Precautions: 1. When plugging the line must clear direction, do not plug the reverse or plug the offset, to prevent burning equipment, plug the line first hold the equipment socket and then plug the line, to avoid excessive force will be socket pins plugged off. The second end of the wire and the circuit board within 2cm of the welded prohibit bending prohibit pulling. 2. a variety of motherboards and equipment signal drive capacity and other conditions are not the same, our test results do not guarantee the same test results and you, as long as the extension cord is connected, the signal will have loss. 3. Graphics card or motherboard is an electronic device will increase with time and aging oxidation, and then connected to the extension cable will only be more unstable. 4. Limited to product engineers specified purchase, only for product testing.

• Product Name：M.2 NVMe key M to PCI-E X16 Angled Extension Adapter Cable
• Cable length: 5cm,15cm,25cm (support cable length customisation)
• Wire Length: Cable length refers to the part of the cable alone, excluding the PCB and connectors.
• Accessory Note: Comes with a SATA power adapter cable that must be connected for 12V power.
• Does not support old devices. If your device is more than three years old not supported.